Line Magnetic LM-150IA valve integrated amplifier
The LM-150iA is a push-pull, Class AB Integrated Stereo Amplifier using KT150 output power tubes, 12AX7 input tubes, 12AU7 rectifier and 6SN7 drivers to deliver 100 watts per channel.
With specially designed EI transformers for power supply and output with wide bandwidth, hand made construction and the finest point-to-point wiring; this amplifier will drive virtually any speaker available to produce fantastic results.
Bias adjustment and control is made easy with two top-mounted bias meters.
With this much power available, the LM-150iA integrated amplifier can drive even the most demanding speakers.
Some Highlights
Push-pull design
Class AB amplifier
Point-to-point wiring
High-quality components
Tubes used in this amplifier
Input stage: 2x 12AX7 (Shuguang)
Rectifier: 1x 12AU7 (Shuguang)
Drivers: 2x 6SN7 (Electro Harmonix)
Power stage: 4x KT150 (Tung-sol)
Features
Hand-made construction with the finest point-to-point wiring
Easy bias control with two top-mounted meters.
Soft start and time-delay circuit – 30 seconds
EI power supply and output transformers with wide bandwidth
ALPS volume control and Realcap capacitors
Metal and removable tube guard cage
Infrared Remote control
The LM-150iA is a push-pull, Class AB Integrated Stereo Amplifier using KT150 output power tubes, 12AX7 input tubes, 12AU7 rectifier and 6SN7 drivers to deliver 100 watts per channel.
With specially designed EI transformers for power supply and output with wide bandwidth, hand made construction and the finest point-to-point wiring; this amplifier will drive virtually any speaker available to produce fantastic results.
Bias adjustment and control is made easy with two top-mounted bias meters.
With this much power available, the LM-150iA integrated amplifier can drive even the most demanding speakers.
Some Highlights
Push-pull design
Class AB amplifier
Point-to-point wiring
High-quality components
Tubes used in this amplifier
Input stage: 2x 12AX7 (Shuguang)
Rectifier: 1x 12AU7 (Shuguang)
Drivers: 2x 6SN7 (Electro Harmonix)
Power stage: 4x KT150 (Tung-sol)
Features
Hand-made construction with the finest point-to-point wiring
Easy bias control with two top-mounted meters.
Soft start and time-delay circuit – 30 seconds
EI power supply and output transformers with wide bandwidth
ALPS volume control and Realcap capacitors
Metal and removable tube guard cage
Infrared Remote control
TUBES
Input stage: 2x 12AX7
Rectifier: 1x 12AU7
Drivers: 2x 6SN7 (Electro Harmonix)
Power stage: 4x KT150 (Tung-sol)
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 3 line inputs, 1 by-pass input
Load impedance: 4/8/16Ω
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.
SPECIFICATIONS
Class AB amplifier
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Weighted A)
Frequency response (-1.5dB): 10 – 50.000 Hz
Sensitivity: 220 mV (Mode intégré)
Input impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω
CONNECTIONS
3x Line inputs RCA (pair)
1x Pré-in input
2x Screw terminals compatible with banana plugs
INCLUDED ACCESSORIES
2x Fuses
1x Remote control
1x Detachable power cord
1x Manual
GENERALITY
Dimensions (L x H x P): 430 x 217 x 355 mm
Weight: 32.5 Kg
