Line Magnetic LM-34IA valve integrated amplifier
The LM-34iA is a push-pull, Class AB Integrated Stereo Amplifier with EL34 output power tubes, 12AX7 and 12AU7 input tubes, providing 40 watts per channel.
Want to enjoy some other types of power tubes?
This amplifier uses very commonly available tubes, giving any tube-roller many hours of enjoyment. The LM-34IA integrated amplifier has tube selector switch allowing the user to replace the standard EL34 with the KT range of power tubes including KT66, KT70, KT77, KT88, KT90, KT100 and others such as 6CA7, 6L6 and 6550.
With specially designed EI transformers for power supply and output with wide bandwidth, hand made construction and the finest point-to-point wiring; this amplifier will get the best from whatever tubes are used.
Bias adjustment and control is made easy with a top-mounted bias meter.
Some Highlights
– Push-pull design
– Class AB amplifier
– Point-to-point wiring
– High-quality components
Tubes used in this amplifier
Input stage: 1x 12AX7, 2x 12AU7
Power stage: 4x EL34
Features
Hand-made construction with the finest point-to-point wiring
Easy bias control with a top-mounted meter.
Soft start and time-delay circuit – 30 seconds
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth
ALPS volume control and Realcap capacitors
Metal and removable tube guard cage
Infrared Remote control
The LM-34iA is a push-pull, Class AB Integrated Stereo Amplifier with EL34 output power tubes, 12AX7 and 12AU7 input tubes, providing 40 watts per channel.
Want to enjoy some other types of power tubes?
This amplifier uses very commonly available tubes, giving any tube-roller many hours of enjoyment. The LM-34IA integrated amplifier has tube selector switch allowing the user to replace the standard EL34 with the KT range of power tubes including KT66, KT70, KT77, KT88, KT90, KT100 and others such as 6CA7, 6L6 and 6550.
With specially designed EI transformers for power supply and output with wide bandwidth, hand made construction and the finest point-to-point wiring; this amplifier will get the best from whatever tubes are used.
Bias adjustment and control is made easy with a top-mounted bias meter.
Some Highlights
– Push-pull design
– Class AB amplifier
– Point-to-point wiring
– High-quality components
Tubes used in this amplifier
Input stage: 1x 12AX7, 2x 12AU7
Power stage: 4x EL34
Features
Hand-made construction with the finest point-to-point wiring
Easy bias control with a top-mounted meter.
Soft start and time-delay circuit – 30 seconds
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth
ALPS volume control and Realcap capacitors
Metal and removable tube guard cage
Infrared Remote control
TUBES
Input stage: 1x 12AX7 – 2x 12AU7
Power stage: 4x EL34
Bias control is accessible on top of the amplifier panel with true ampere meter.
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.
Metal and removable tube guard cage
Infrared Remote control
SPECIFICATIONS
Class AB amplifier – 2x40W RMS
THD: 1% (1kHz)
Signal/Noise ratio: 88dB (Weighted A)
Frequency response (-1.5dB): 10 – 50.000 Hz
Sensitivity: 200 mV (Mode intégré)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8Ω
1x Pré-in input
2x Screw terminals compatible with banana plugs
CONNECTORS
3x Line inputs RCA (pair)
INCLUDED ACCESSORIES
2x Fuses
1x Remote control
1x Detachable power cord
1x Manual
GENERAL
Dimensions (L x H x P): 377 x 190 x 345 mm
Weight: 20 Kg
