Line Magnetic LM-512CA valve preamplifier
The LM-512CA is Line Magnetic’s flagship preamplifier.
This preamplifier uses two 6KZ8 tubes for voltage amplification, two 6922 tubes for the driver stage and American RCA 22DE4 tubes for high voltage rectification.
A selector on the rear of the preamplifier allows the user to select the phase of the XLR input, allowing connection of almost any source.
Nothing but top-grade components are used in the LM-512CA preamplifier including:
American RTX Multicap capacitors
Danish Jensen capacitors
German Mundorf MCap capacitors
NCC capacitors
Nichicon capacitors
Kiwame capacitors
Motorola high current rectifier bridge
Panasonic relays
Line Magnetic’s LM-512CA preamplifier received the German Red Dot award In March 2017. This award is informally recognised as the “Oscar for International Industrial Design” rating this preamplifier among the best in the world.
Some Highlights
Point-to-point wiring
High-quality components
“Hot” phase selector for XLR input
Tubes used in this preamplifier
2x 6KZ8 (Mullard)
2x 6922 (Genalex)
2x 22DE4 (American RCA)
Features
Hand-made construction with the finest point-to-point wiring
Soft start and time-delay circuit – 30 seconds
The LM-512CA is Line Magnetic’s flagship preamplifier.
This preamplifier uses two 6KZ8 tubes for voltage amplification, two 6922 tubes for the driver stage and American RCA 22DE4 tubes for high voltage rectification.
A selector on the rear of the preamplifier allows the user to select the phase of the XLR input, allowing connection of almost any source.
Nothing but top-grade components are used in the LM-512CA preamplifier including:
American RTX Multicap capacitors
Danish Jensen capacitors
German Mundorf MCap capacitors
NCC capacitors
Nichicon capacitors
Kiwame capacitors
Motorola high current rectifier bridge
Panasonic relays
Line Magnetic’s LM-512CA preamplifier received the German Red Dot award In March 2017. This award is informally recognised as the “Oscar for International Industrial Design” rating this preamplifier among the best in the world.
Some Highlights
Point-to-point wiring
High-quality components
“Hot” phase selector for XLR input
Tubes used in this preamplifier
2x 6KZ8 (Mullard)
2x 6922 (Genalex)
2x 22DE4 (American RCA)
Features
Hand-made construction with the finest point-to-point wiring
Soft start and time-delay circuit – 30 seconds
TUBES
2x 6KZ8 (Mullard)
2x 6922 (Genalex)
2x 22DE4 (American RCA)
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
SoftStart and time-relay circuit (30 seconds)
High quality components: Multicap, BC Axial, Philips, Panasonic Relay
HOT selector
SPECIFICATIONS
THD: 0,5% (1KHz)
Signal/Noise ratio: 90dB
Frenquency response: 15 à 30 KHz (-3dB)
Frequency response RCA: 17 à 10 KHz (-3dB)
Sensitivity line input RCA: 150mV
Input Impedance: 600kΩ
CONNECTIONS
3x Line inputs RCA (pair)
1x Input XLR (pair)
1x Output RCA (pair)
1x Output XLR (pair)
INCLUDED ACCESSORIES
2x Fuses
1x Remote control
1x Detachable power cord
1x Manual
TUBE BASICS
6KZ8
6922
22DE4
GENERAL
Dimensions (L x H x P): 430 x 196 x 383 mm
Weight: 20 Kg